incoming X-rays
focus F — R/2
detector

Lobster-eye optic. Millions of square micro-pores tile a spherical plate, every channel aimed at the centre of curvature. X-rays reflect off the pore walls at grazing angles and meet at a focus halfway to the centre — F = R/2 — giving a very wide field of view.

drag to orbit · scroll or pinch to zoom

×1.0

The interactive 3D view needs WebGL, which this browser could not provide. Here is the original drawing instead — the views below still work:

Drawing of the lobster-eye optic grid with rays converging to focus F at R/2 and the detector.

The micro-pore plate

The tubes sit on a sphere: pores radial, like spokes, every one pointing at the same centre C. Face-on, the plate is a plain grid of square holes — but each hole is a long, hollow channel with walls smooth as mirrors. Move across the plate to pick a pore and see it magnified.

Left: the fan of tubes on their sphere. Right: the plate face-on; the highlighted pore is magnified below — one hollow square channel, tilted at the angle its position on the sphere gives it.

Inside one pore

Magnified, a single pore is a long square tube. An X-ray can only enter at a grazing angle — a few degrees at most — and instead of being absorbed it reflects off the wall. Each bounce flips it across the tube axis. Drag the angle and watch the bounces change.

5.5°
1 bounce in this plane

Bounces in one plane focus the ray to a line. Bounce in both planes — use “Second plane” to see the same pore from above — and the two lines cross at a point: the pinpoint focus. Rays reflected in only one plane form the cross-shaped arms around it.

Focusing at R/2

A distant source sends parallel rays. Each ray reflects inside the pores it crosses, and the reflected rays converge on the focal sphere — half the radius away, R/2 — where the detectors sit. Sweep the source and the focus slides along the sphere.

0°

The focus is not a flat plane but a sphere of radius R/2, concentric with the plate — so the detectors are curved to match it.

A wide field of view

Because the plate is spherical, sources far off-axis focus just as well — each to its own point on the same curved detector, all at the same time. One pointing covers ~80° across in this slice, and the same again in the other direction: a huge patch of sky. A traditional X-ray telescope sees less than 1° across; Einstein Probe’s WXT covers 3,600 square degrees at once.

+25°

Toggle the three fixed sources, and drag the probe source — its focus tracks along the detector arc, with no moving parts and nothing to re-point.

The original 2D drawing of the lobster-eye optic grid: square-pore spherical plate with cutaway, rays converging to focus F at R/2, and the detector.